|
Processing and installation
SGG STADIP COLOR is processed and glazed in the same way as PVB laminated glass, in accordance with current national standards. A maximum of five interlayers can be combined together, thus the overall thickness of the assembly must be taken into account for installation.
Please note the following recommendations:
-
Multi-interlayered combinations can result in a different appearance on either side of the glass. The preferred viewing side must be specified by the client and the glass will be labeled accordingly for installation purposes.
Holes and notches can be drilled for fixing and various shapes can be cut prior to lamination. It is not possible to hand cut holes and notches after laminating. Internal corners are always radiussed. Special care must be taken in specifying laminated glass with holes, notches, cut-outs or mitred edgework, as the glass may not withstand the resultant stress without fracture. Laminated glass should be supported on all four edges and be free of holes, notches and cut-outs to achieve its optimum performance and penetration resistance. Unless gasket glazing into drained and ventilated systems, the PVB interlayers must be protected against water ingress.
For external applications:
Any assembly comprising the yellow interlayers (Golden Light and Sahara Sun) should also incorporate additional clear PVB to avoid possible discoloration. Thermal safety assessment is necessary to determine the requirement for heat strengthened or toughened laminated glass.
Copyright Solaglass Ltd 2004. All rights reserved.
SGG STADIP COLOR, SGG STADIP DESIGN, SGG PLANILUX, SGG DIAMANT, SGG SATINOVO, SGG MASTERGLASS, SGG SECURIT, SGG PLANIDUR and all logos and devices are registered trade trademarks
|
Applications
Range
Advantages
Performance
Processed
Processing