Bonding Our Furniture

The process of bonding using adhesive cured by ultra violet (UV) light is a relatively new process. Single component adhesives achieve their final hardness through the exposure of UV light (ray spectrum 315 – 400nm). The finished bond is crystal clear or highly transparent and depending on the type of adhesive: very hard or elastic. The special advantage of these adhesives is their easy and clean application as well as extremely short curing times and high stability. We use the finest adhesives and have developed special relationships with manufacturers to produce the ultimate joint which is stronger than glass itself. Due to the intense UV light used in adhesive curing process our staff has been highly trained, working to a very high standard of health and safety.

Method

The London Glass Company (UK) Ltd has evolved over many hours of in-depth research and development ensuring the quality of the product is of the highest standard. Glass manufacturers have been constantly monitored to ensure we receive carefully prepared elements and joints and have been extensively tested to demonstrate their strengths and durability. The designs have been carefully considered to be stylish and practical and will add a rich and pleasing effect to the surroundings for which it is purchased.

Transparent materials are a great way to soften the hard edges of minimalism and, because they are see through, they are perfect for small spaces and urban living.

Results

The London Glass Company (UK) Ltd has produced the finest in glass furniture, proudly made in Britain using British components, materials and expertise. We are delighted with the unique and contemporary products, which have been manufactured by well-trained craftsmen with passion and considerable knowledge of the product and the industry.

Bespoke

In addition to the comprehensive range of glass furniture we have opened the door to your imagination. We offer a bespoke service where you can create your own design or work with our designers to create furniture to your personal style.

If you desire enhanced clarity and ultra clean lines, specify Optiwhite glass by Pilkington. Almost colourless, this glass has a low iron content, which virtually eliminates the green hue inherent in our standard clear glass. This is especially noticeable on exposed, polished edges and thicker glass such as tabletops.

Glass

Flat glass is made by the fusion of several inorganic compounds, fifteen per cent recycled glass is used in its fabrication with the remainder being composed principally of silica sand (Si02) soda, ash, dolomite and limestone. Trace ingredients such as fining, colonising, oxidising agents and water prevent segregation. Once heated and molten the fused mass is cooled to ambient at a rate fast enough to prevent crystallisation which is essential in transparent glass.

Heat Treatment

Toughened glass (or tempered glass as it is also known) is produced when float glass is heated to around 650.C, then quenched with air jets so that the surfaces are cooled quickly with the inside core cooling more slowly. At room temperature, the core continues to cool. The surfaces go into compression and the core goes into tension. When the glass breaks, the core releases tensile energy resulting in the formation of small, safer glass particles.

WARNING

• Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats are used to prevent such items from coming into contact with the glass.

• Do not sit or stand upon the glass surface(s).

• Do not use the glass as a chopping surface. Do not strike the glass with hard pointed items.

• When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary; do not use washing powders or any other substances containing abrasives since these substances scratch glass’.

• Do not lift the glass furniture by use of the glass rods.